Easy Garage Door Repair Tips to Help You Save Money

A garage door is perhaps one of the most important and large investments that someone can make when they purchase a home. It provides not only an aesthetic look to your house, but it offers security as well as protection from the elements. Because of its size and weight, however, problems can occur with any moving part inside or outside of your garage door which will oftentimes require repairs by a professional. However, there are some easy do-it-yourself (DIY) fixes that can save you both time and money.

Reading this article: You’ll learn: How to repair broken cables on a garage door opener The different parts of a garage door opener Where to locate common problems for garage doors And how to fix them yourself!

There are several companies providing garage door installation. If you want to be comfortable in managing and repairing your garage doors, pay Elite Garage Door Repair and Local Garage Door Services Inc a visit today!

How to Repair Broken Cables on a Garage Door Opener

The cables that run through the garage door opener play a vital role in its operation. These cables not only allow the garage door to move up and down, but they also bring power to all of the various parts that make up your automatic garage door opening system. The cable will often break unexpectedly due to constant wear and tear; this is why it’s important to check them regularly. If you suspect that one or more of these wires has snapped (you should be able to see exposed wire), then you can try repairing it yourself with some help from our how-to guide: How to Fix Broken Cables.

Parts of a Garage Door Opener

Garage doors openers are large complex systems that contain many moving parts. By knowing some of these vital components, it will help you to diagnose some problems easier on DIY repairs. Each opener system is different; however, there are several common parts that can be found in most door openers.

– Photocell: A photocell (light sensor) is used for garage doors with windows or translucent panels. When this type of panel is opened manually, the photocell picks up on the change in light and triggers the movement of the garage door opener mechanism.

– Limit Bracket: The limit bracket is what keeps your garage door from travelling too far when it opens or closes. This helps prevent damage to your home’s walls, foundation and even your neighbour’s property! Limit brackets can be adjusted to regulate how far your garage door travels. The distance limit is important for safety reasons, so take the time to make sure that this bracket is set correctly: How to Adjust a Garage Door Limit Bracket.

– Spring (or Torsion Springs): These springs make up the majority of force needed to lift and close your garage door; they should always remain taut. If you suspect one of these has snapped or loosened, then you should call a professional right away as it could lead to injury or damage. The longer you wait, the harder it will become! Learn More About Garage Door Torsion Spring Repair Costs.

– Outer Chain: The outer chain links allow your garage door opener’s motor drive to open and close the garage door. These chains are important as they supply movement to all of the various parts that make up your opener system.

– Upper/Lower Rail: These two rails provide support for the garage door panels as well as allow them to move up and down when activated by your opener’s motor drive. The opening and closing of the garage door cause these rails to wear out quickly, so it’s best to inspect them regularly for damage or loose bolts. How To Tighten Loose Garage Door Rails.

– Emergency Release Handle: This is an important safety feature built into many modern automatic garage doors; it can either be wired into your wall control unit or mounted within arm’s reach on the ceiling or floor. If you find yourself stuck inside your garage, you can use this handle to get out.

– Garage Door Weather Sealing: Although this is a separate part from the actual door opener system, it’s important to include it in any list of garage door parts. A weather seal should always be present at the junction between sections of your rolling garage door to prevent cold air from being blown into your home during the winter months. This will save you money on heating costs and help protect against ice build-up on the floors! Learn More About Installing a Garage Door Weather Seal.

Where to Locate Common Problems for Garage Doors

When you notice something is not working properly with your garage door, there are several things to check before calling a professional. Depending on where the problem lies, it may be an easy do-it-yourself fix! Here are some common problems that people encounter when they try to open or close their garage doors:

Is One of Your Garage Door Panels Sticking?

One thing that will cause your garage door to stay up after reaching the end of its travel is if one side is stuck closed due to debris buildup. This issue could happen for several reasons; for example, if leaves fall into the track and wind up jamming your opener mechanism (this can also cause it to make loud screeching noises). If this is what’s causing your door to stay up, clean the track and try to re-align it. If this still does not remedy the problem, you may need to lubricate the parts and replace any damaged rollers.

What to Do When Your Garage Door Gets Stuck Halfway Open

If your garage door is trying to open but only moves a few inches, you probably have a broken spring up top. This means that one of the springs in your system (usually on the right) has snapped! While replacing these can be difficult if no one is helping you out, there are ways around it; for example, some professionals will give special prices when they’re called out in situations like.

Garage door springs should always remain taut, or else they can snap and cause injury. It’s best to call a professional garage door repair service if you are noticing that one of your springs is starting to sag. They will be able to replace it with a new one – unless it’s already broken! Garage Door Broken Spring Repair Cost.

How Can You Fix Your Garage Door From Making That Grinding Noise?

Yes, another common problem that people have is hearing strange grinding noises coming from their garage doors. If the opener motor is trying to move your panels but there is too much friction on them, this can happen. This usually happens because dirt, gravel, or other debris has its way into the tracks or is causing the tracks to rust and scrape against each other. Try to clean out the tracks, but if this doesn’t work, you may need to replace them and re-align your door.

How Can You Tell If Your Garage Door Is Out of Alignment?

The easiest way to tell if your garage door is not opening correctly due to it being out of alignment is by looking at its tracks. If they are uneven or aren’t parallel with each other, there is a problem! Even if your purpose for opening your garage door isn’t working, this issue will prevent even that from happening right. Call a professional immediately if you notice anything off about how your garage door is functioning; it could save you in the long run! Check Alignment of Garage Door.

In addition to garage doors getting stuck halfway open, many professionals also receive requests from homeowners who need their springs replaced on one side or another of the door. If you are noticing that one panel is more difficult to lift than the others, it might be because its corresponding spring has snapped! In this instance, seek help from a friend while you ask a professional about replacing your broken springs with brand new ones.

How Much Will It Cost Me to Get My Garage Door Fixed?

Repair of garage doors usually cost around $100 just to have the springs replaced. If it is another part, such as a track or panel, you may be looking at a much higher cost depending on what the problem is! Having quick and quality garage door repair service by a pro will save you time and money in the long run, so don’t hesitate to schedule an appointment with one if you notice any issues with how your doors are functioning.

Garage door springs break often enough that they should always remain taut! If they don’t, then over time debris can get into tracks and damage them. This not only causes your garage door to become out of alignment, but it can also become dangerous; so, remember the next time your springs start sagging to call a professional immediately!

Do you need Garage door repair, Gate installation or maintenance services in Irvine, Texas? We at Swift Garage Door Repair LLC always aim to deliver the best service to our clients in an affordable cost. Aside from that, we provide Free inspection, insurance coverage and warranty for all our repair or installation services. Reach us right away at (214) 988-9182 for professional assistance.

Contact Us:

Swift Garage Door Repair LLC
613 N O’Connor St Suite# 21B
Irving, TX 75061
(214) 988-9182
https://swiftgaragedoorsrepair.com

Find us on Google Map here: